https://www.dekut.com/Automobiles/how-to-eliminate-the-failure-of-the-grinding-disc/ In the daily use of the grinding disc, there will often be a variety of different faults, which directly lead to the grinding disc not working properly. Therefore, as a user, it is necessary to have a comprehensive understanding and learning of the various types of failures of the grinding disc, the causes of the problems, and the methods of solving the problems. The following are some of the frequently occurring faults listed by China grinding disc manufacturer, providing reasons for their production capacity and solutions. First, no powder or less powder, low yield. The reason for this is: Read More 1. The locker is not adjusted, the seal is not strict, and the suction is reversed. 2. The blade wears a large material shovel can not afford. The method of its exclusion: Check and adjust the lock of the locker and find that the leak should be blocked and replaced with a new one. Second, the finished powder is too thick or too fine. The reason for this is: 1. The blade of the analysis machine is seriously worn and cannot be graded. 2. The fan air volume is not appropriate. The way to exclude it is: Replacing the blade and properly closing the air volume of the small fan can solve the over-thickness. If it is too thin, the inlet air volume should be increased. Fri, 30 Nov 2018 07:18:36 UTC en